Enable ePoE (PoE Extender)

Modified on Thu, 4 Jun at 4:12 PM

Valid for the current range of GIGAMEDIA IP recorders *

ePoE function allows to extender distance (2x 90 meters) of your RJ45 connection between your camera and the recorder

Go to Main Menu -> Configuration / Channel then CIP Channels and Edit the camera you want (CA1, CA2

, CA3,...)

Graphical User Interface (GUI) :

WEB Interface :

Auto Mode : (by default) - The maximum bandwidth is limited to 100 Mbps.

EPOE Mode : the maximum bandwidth is limited to 10 Mbps and POE transmission distance will be extended up to 200 meters with RJ45 cable, according type of cable used *

Warning : If you have a connection problem with Auto mode when the IP camera is powered by PoE via a RJ45 cable longer than 100 meters, then change to ePOE mode for a stable connection. If the video is stuck while in ePoE mode, try to reduce the encoding bitrate.

* GIGAMEDIA recommands a CAT6 cord, rigid and shielded.

----------------------------------------------------

* Depending on the model and firmware version used :

GGM KITIP24C5MP

GGM KITIP24CD5MP

GGM KITIP48C5MP

GGM KITIP48CD5MP

GGM KITIP48C4MPA

GGM KITIP48CD4MPA

GGM KITIP48CDM5MP

GGM KITIP816C5MP

GGM KITIP816CDM5MP

GGM NVRL0104

GGM NVRL0104P

GGM NVRL0108P

GGM NVR0108PA

GGM NVR0208P

GGM NVR020808P

GGM NVR0216P

GGM NVR021608P

GGM NVR021616P

GGM NVR0232

GGM NVR023216P

GGM NVR0416

GGM NVR0432

GGM NVR043216P

GGM NVR0816

GGM NVR081616P

GGM NVR083216P

GGM NVR0832

GGM NVR16

GGM NVR32

GGM NVRE0104P

GGM NVRE0108P