Enable ePoE (PoE Extender)

Gewijzigd op Vr, 7 Jul, 2023 om 11:43 AM

This article is not available in Finnish, view it in French

Valid for those refrences :

GGM KITIP24C5MP
GGM KITIP48C5MP
GGM NVRL0104
GGM NVRL0104P
GGM NVRL0108P

ePoE function allows to extender distance (2x 90 meters) of your RJ45 connection between your camera and the recorder

Go to Main Menu -> Configuration / Channel then CIP Channels and Edit the camera you want (CA1, CA2

, CA3,...)

Graphical User Interface (GUI) :

WEB Interface :

Auto Mode : (by default) - The maximum bandwidth is limited to 100 Mbps.

EPOE Mode : the maximum bandwidth is limited to 10 Mbps and POE transmission distance will be extended up to 200 meters with RJ45 cable, according type of cable used *

Warning : If you have a connection problem with Auto mode when the IP camera is powered by PoE via a RJ45 cable longer than 100 meters, then change to ePOE mode for a stable connection. If the video is stuck while in ePoE mode, try to reduce the encoding bitrate.

* GIGAMEDIA recommands a CAT6 cord, rigid and shielded.