Upgrading GIGAMEDIA recorders (manually)

Modificado el Vie, 9 Ago a 11:35 A. M.

Upgrading GIGAMEDIA recorders (manually)

Une image contenant Appareils électroniques, Appareil électronique, conduire

Description générée automatiquement

Requirements:

To proceed with the update you need the update file for this you need 3 pieces of information:

  • The type of recorder
  • The hardware version
  • The software version

To retrieve certain information you will need to open the system information and for this if you go through a computer you will have to go to remote setting then information and on a screen connected directly to a recorder you will find it by clicking on the logo in the shape of an “I” at the bottom of the screen (display on a bar at the bottom of the screen by right-clicking or by moving your smile down)   

 

Example : 

Une image contenant texte, capture d’écran, Police, menu

Description générée automatiquement


Type of recorder

We have two types of recorder which are AHD recorders and NVR recorders which differ with their type of cameras connectors or their references

The AHD recorders or analog recorders have BNC or coaxial type connectors and have a reference starting with CCAHxx

Link for AHD recorders: https://support.gigamedia.net/en/support/solutions/articles/44001819672-firmware-gigamedia-ahd-recorders

NVR or IP recorders have Ethernet or RJ45 connectivity and have a reference starting with NVR or KITIPxx

Link for NVR Recorders: https://support.gigamedia.net/en/support/solutions/articles/44001819827-firmware-gigamedia-recorders-nvr


Hardware Version

This information allows you to determine on which row of the table you will find your update, if more than one row has your hardware version, please use your product part number

Une image contenant texte, capture d’écran, Police, nombre

Description générée automatiquement


Software Version

On the software version, 2 information will interest us the first and the update version and the update release date (here V8.2.4.1 and 2024/03/14 see image in requirements)

Download and Setup

Once on the update site, please compare the information of the software version of your recorder with the one corresponding to the site (in this case here the recorder is at version V8.2.4.1 released on 2024/03/14 while on the site we are at version V8.2.3 released on 2023/02/17), if the information of your device is the same or better than the one displayed on the site then your device is up to date otherwise Please click on the corresponding download link.


When you have downloaded the update file of your recorder you will have to unzip it (the method changes depending on your computer on windows 11 you can do it without software on windows 10 you will need a software like winrar or 7zip on the image below you have the method for both software) 

Example : 

Une image contenant texte, logiciel, nombre, capture d’écran

Description générée automatiquement

Unzip and copy the file into USB Key

Then you can proceed with the update by going through the configure Menu -> System -> Maintenance and PpdateAll you have to do is select your update file and validate

 

On a computer the principle remains the same, you have to go to remote Setting -> System -> Maintenance and Upgrade

Une image contenant capture d’écran, logiciel, Logiciel multimédia, texte

Description générée automatiquement

Archivos adjuntos (1)

¿Le ha sido útil este artículo?

¡Qué bien!

Gracias por sus comentarios

¡Sentimos mucho no haber sido de ayuda!

Gracias por sus comentarios

¡Háganos saber cómo podemos mejorar este artículo!

Seleccione al menos una de las razones
Se requiere la verificación del CAPTCHA.

Sus comentarios se han enviado

Agradecemos su esfuerzo e intentaremos corregir el artículo