GGM WAPCD3 – How to disable the front LED ?

Modificado em Mon, 20 Dez, 2021 em 11:45 AM

GGM WAPCD3 – How to disable the front LED ?

To remove the flashing LED in front of the terminal, you have to access to the Web Interface via IP (by default : 192.168.188.253)

====================================================================

Video available on Youtube by searching for "GGM WAPCD3"

====================================================================

1. Go to 2.4Ghz Advanced Configuration

2. Disable LED button

3. Apply

WARNING : LED is a visual indicator, it will no longer be possible to check this status of the device without going to the WEB interface

Anexos (1)

GGM WAPCD3 –....pdf
183 KB