GGM KITIP24xx-48xx - How to use RTSP Protocol of your recorder

How to use RTSP Protocol of your recorder ?

Valid for those references :

• GGM NVRL0104 
• GGM NVRL0104P
• GGM NVRL0108P 
• GGM NVRE0104P
• GGM NVRE0108P
• GGM KITIP24C5MP
• GGM KITIP48C5MP

1. What is the RTSP Protocol ?
2. How to find RTSP command of your recorder ?
3. How to read RTSP Stream with an application (Example : VLC Media Player)

RTSP Protocol (Real Time Streaming Protocol) is used to send audio or video live from one device to another.

RTSP Command is a specific address given by your recorder.

Example : rtsp://192.168.1.1/xxxx/live1

Go to the Main Menu, then Setup/Network then General and RTSP :

Warning: Depending on the model and generation of recorder, the address of the RTSP stream may change.

Model before 2023:

Instruction :

rtsp://(IP):(Port)/A/B

A: 01(ch1), 02(ch2)..

B: 0(Main Stream), 1 (Sub Stream) 

Example : 

rtsp://192.168.1.212:554/ch01/0 for the Main Stream of the Camera 1

rtsp://192.168.1.212:554/ch02/1 for the Sub Stream of your camera 2

Model after 2023 : 

Instruction :

rtsp://IP:Port/rtsp/streaming?channel=A&subtype=B

A: 01(ch1), 02(ch2)..

B: 0(Main Stream), 1 (Sub Stream) 

Example : 

rtsp://192.168.1.1:554/rtsp/streaming ?channel=01&subtype=0

 for the Main Stream of the camera 1

rtsp://192.168.1.1:554/rtsp/streaming ?channel=02&subtype=1

for the Sub Strem of the camera 2

Open your specific application to open a Network Stream.

In this case here, we use VLC Media Player Program.

Go to Media / Open a Network Stream …

Fill in the RTSP address of your camera  :

Example : rtsp://192.168.1.211:554/ch1/0

rtsp://192.168.1.1:554/rtsp/streaming ?channel=01&subtype=0

If necessary, you need to be identify

Stream is instantly displayed.