Enabling HTTPS on a UNIVIEW NVR

Please note: Gigamedia cannot help you implement this protocol beyond activation. This requires a custom certificate, which cannot be done by Gigamedia.

1. Accessing the NVR web interface:
   • Open a web browser.
   • Enter the IP address of the NVR in the address bar.
   • Log in with your admin credentials.
2. Enable HTTPS:
   • Settings > System > Security > HTTPS tab.

• Enable HTTPS.
• You can generate a self-signed certificate or import a custom certificate if needed.
• Click Save to save the changes.
2. Reboot and secure access:
   • Once activated, the NVR can reboot.
   • You will then need to access the interface via https:// [IP address].

4. Certificate verification:
   • If you are using a self-signed certificate, the browser will display a security alert. You can ignore it or install the certificate as a trusted authority.

Note: The default HTTPS port is 443. You are free to modify it or redirect this port if necessary.