GGM KITIP24xx-48xx - How to use Input Alarm contacts

Gewijzigd op Vr, 3 Nov, 2023 om 4:02 PM

This article is not available in Finnish, view it in French

How to use Input Alarm contacts ?

Valid for those references :

You can use Input Alarm (Passive Alarm) from the rear Panel and create the scenarios you want.

Example 1: You want to use Input 1 Alarm and trigger recording Channel 1 only when alarm is normally close

Example 2: You want to activate a siren with the output Alarm of the recorder as soon as motion detection is active on a camera.

Power Limit MAX DC12V 300mA

Go to Main Menu, then SETUP then Alarm and IO

Choose the Channel you want (IO-1 means Input Alarm 1, IO-2 means Input Alarm 2…)

Choose IO Status : Normally Open or Normally Close
Latch Time : Choose the activation time of the Input contact
Actions: You can decide to activate one or more actions such as Alarm Output, recording Channels, Full Screen or send Email…

Bijlagen (1)

GGM KITIP24x....pdf
401 KB