How to use Input Alarm contacts ?
Valid for those references :
- GGM KITIP24C5MP
- GGM KITIP48C5MP
- GGM NVRL0104
- GGM NVRL0104P
- GGM NVRL0108P
- GGM NVR0208P
- GGM NVR0216P
- GGM NVR02168P
- GGM NVR8
- GGM NVR16
- GGM NVR32
- GGM NVRE0104P
- GGM NVRE0108P
You can use Input Alarm (Passive Alarm) from the rear Panel and create the scenarios you want.
Example 1: You want to use Input 1 Alarm and trigger recording Channel 1 only when alarm is normally close
Example 2: You want to activate a siren with the output Alarm of the recorder as soon as motion detection is active on a camera.
Power Limit MAX DC12V 300mA
Go to Main Menu, then SETUP then Alarm and IO
- Choose the Channel you want (IO-1 means Input Alarm 1, IO-2 means Input Alarm 2…)
- Choose IO Status : Normally Open or Normally Close
- Latch Time : Choose the activation time of the Input contact
- Actions: You can decide to activate one or more actions such as Alarm Output, recording Channels, Full Screen or send Email…
Var artikeln till hjälp?
Toppen!
Tack för din feedback
Vi beklagar att det inte var till hjälp
Tack för din feedback
Feddback skickat
Vi uppskattar din feedback och uppdaterar artikeln vid behov