GGM KITIP24xx-48xx - How to create a Backup file of the system Log

Modificado em Fri, 03 Nov 2023 às 11:31 AM


How to create a Backup file of the system Log



 

Valid for those references :

  • GGM KITIP24C5MP
  • GGM KITIP48C5MP
  • GGM NVRL0104 
  • GGM NVRL0104P
  • GGM NVRL0108P 
  • GGM NVR0208P
  • GGM NVR0216P
  • GGM NVR02168P
  • GGM NVR8
  • GGM NVR16
  • GGM NVR32
  • GGM NVRE0104P
  • GGM NVRE0108P

 

Caution : For any configuration, you need to connect an HDMI display device directly to the back of the recorder (Monitor or TV) 

The system log shows you important system events, such as motion alarms and system warnings. You can easily create a backup file of the system log for a set time period to a USB flash drive.

 

 

Go to SETUP, then SYSTEM and MAINTENANCE and choose LOG Menu.

 

 

 

 

  1. Choose the Starting Date & Time
  2. Choose the End date & Time
  3. Select the type of events you would like to search from the dropdown next to Log Type, or select All to see the entire system log for the selected time period.
  4. Click Search
  5. Click Backup to create a backup of the system log for your search period

Please make sure your flash drive has been connected to your NVR’s USB port. connue.

 

  1. OK to finish

 

 

Backup Verification into your USB stick

 

 

 

 

 

                                                        




Este artigo foi útil?

Isso é ótimo!

Obrigado pelo seu feedback

Lamentamos por não termos podido ajudá-lo(a)

Obrigado pelo seu feedback

Diga-nos como podemos melhorar este artigo!

Selecione pelo menos um motivo
A verificação CAPTCHA é obrigatória.

Comentário enviado

Agradecemos o seu esforço e iremos tentar corrigir o artigo